how to change rear shocks on jeep wrangler tj

It is most important to select the perfect shock for your vehicle before changing. Changing your rear shocks is a relatively easy task that can be done in just a few minutes. In this article, we will show you how to change rear shocks on jeep wrangler tj.

how to change rear shocks on jeep wrangler tj

Remove the Wheel and Tire

Removing the wheel and tire from a Jeep Wrangler TJ can be a daunting task, but it’s not as difficult as it may seem. The first step is to remove the four bolts that hold the wheel on. Once those are removed, you can simply pull the wheel off of the axle. Next, you’ll need to remove the two bolts that hold the tire to the rim. Finally, remove the tire itself.

Remove the Shock Mounting Bolts

The shocks on a Jeep Wrangler TJ are held in place by mounting bolts. These bolts can be removed with a standard wrench, allowing the shock to be lifted off of the axle.

Remove the Old Shocks

Once you have removed the shock mounting bolts, you are now able to remove the old shocks.

Install the New Shocks

install the new shocks after removing the old shocks and replace the bolts that hold them in place

Replace the Wheel and TireĀ 

After installing new shocks, the wheel and tire must be replaced with bolts that hold the wheel in place

How do I know if I need new shocks on my Jeep

If you are experiencing excessive motion or bounce when driving, it is likely that your Jeep Wrangler TJ’s rear shocks need to be replaced. Rear shocks are essential for providing stability when driving over rough terrain or through potholes, and their failure can cause serious damage to your vehicle. To determine if your Jeep Wrangler TJ’s rear shocks need to be replaced, first consult with a mechanic or an online guide like this one.

Should I replace all 4 shocks at the same time

Replacing all four shocks on a Jeep Wrangler TJ can be a costly and time-consuming undertaking. To determine which shocks need to be replaced, first assess the condition of each one. If they are visibly damaged, have rust spots or are completely worn out, it is best to replace them all. However, if only one or two of the shocks show signs of wear and tear, those may be able to be replaced without any further cost or hassle.

Will new shocks make ride smoother

Jeep Wrangler TJ owners often wonder if new shocks will make the ride smoother. The answer, unfortunately, is that it depends on the type of shock and your driving habits. If you’re a heavy driver who regularly goes off-road, then a more aggressive shock may be a better option for you. Conversely, if you only drive on smooth roads, then a less aggressive shock may be more appropriate. Ultimately, it’s important to trial different shocks to find the one that suits your driving style and vehicle.

Why do I feel every bump on the road

if your rear shocks are worn out or not working properly, you may start to feel every bump on the road. This can make driving difficult and uncomfortable, and may even lead to accidents. If you notice that your Jeep Wrangler TJ is making more noise than usual or that the ride is becoming rougher, it’s important to get the shocks replaced as soon as possible.

Will TJ shocks fit a JK

There are a few different types of shocks available for the Jeep Wrangler TJ, depending on the year and model. The most common type of shock is the coil-over suspension system. This type of shock is designed to be replaced with a new unit when it becomes worn or damaged.

If you have a 2002-2004 Jeep Wrangler TJ, then the shocks will not fit onto a 2007-2009 Jeep Wrangler JK. The 2007 and later models use a different type of shock that is not compatible with the older units. To replace the shocks on a 2002-2004 Jeep Wrangler TJ, you will need to purchase new units from an aftermarket supplier or dealer.

Final Words

Changing the rear shocks on a Jeep Wrangler TJ is not as hard as it seems. With a little bit of patience and these simple instructions, you can do it yourself!

Leave a Comment